A well-insulated attic prevents heat loss and reduces energy costs. It helps keep indoor and outdoor air separated, making it easier for your home to stay comfortable year-round. This upgrade is one of the most affordable and highest-return ENERGY STAR home upgrades.

Keystone Premier Spray Foam Insulation levels and air leaks cause your heating and cooling system to work harder, wasting energy. They also make your home feel drafty and uncomfortable during winter and summer.

Understanding R-Value: What You Need to Know for Effective Attic Insulation

You can add attic insulation as a DIY project, or hire a professional to do it for you. Before you start, measure the existing insulation with a tape measure to see how much you have. Choose the type of insulation that best fits your needs, budget and climate.

Fiberglass batt and roll insulation is a common choice. It comes in pre-cut, long rolls that are easy to fit between the framing members (like joists and trusses) in your attic. It resists heat flow, and can be blown in using special equipment. It is usually paired with an attic air seal. It has a R-value of 2.9-4.3 per inch.

If you want to add cellulose or mineral wool insulation, make sure it is unfaced (it has no paper layer) and does not overlap with the fiberglass. It is more expensive than fiberglass, but it does not require a vapor barrier and is moisture resistant. Cellulose is also a favorite snack of raccoons, so it is not recommended if you live in an area where raccoons are a problem.

Keystone Premier Spray Foam Insulation
8 Azalea Dr, Windsor, PA 17366, United States
717-501-3718

While kitchens and bathrooms get the most attention when it comes to home improvement, attics can also benefit greatly from proper insulation. An insulated attic keeps heat inside in winter and out in summer, saving you money on energy bills while maintaining a more comfortable home.

Desert Spray Foaming can lead to cold rooms, ice dams, and high energy bills. If you’re noticing any of these issues, it’s time to call for a professional insulation contractor in Phoenix.

There are several types of attic insulation available, including blanket or batt insulation, blown-in insulation, spray foam, and rigid foam boards. Each type has advantages and disadvantages. Before selecting a type, consider the following factors:

Blanket Insulation

A popular DIY choice, blanket insulation comes in sheets that can be easily affixed to attic floorboards. This type of insulation is made of fiberglass, cellulose, or mineral wool. It is cheaper than other options but has a lower maximum R-value and may settle over time, leading to gaps that let outside air into your home.

Blown-in Insulation

Also known as loose-fill, this type of insulation is blown into the attic from a portable machine. It can be made of fiberglass, cellulose, mineral or rock wool. It costs more than other types but has a higher R-value and can be used in tight spaces. It can be difficult to install correctly, so it’s best to leave this type of attic insulation to a professional.

Desert Spray Foaming
150 Fm 1429 Seminole, TX 79360
432-209-9154

The attic is an often forgotten part of your home, tucked away behind rarely seen rafters and hidden from sight. However, it can contribute to a significant amount of energy waste and costly utility bills if it is improperly insulated. Proper attic Insulation contractor keeps warm air in during the winter and cool air in during the summer, reducing HVAC workload and resulting in substantial long-term energy cost savings.

Inadequate or damaged insulation allows heat to escape through your ceilings, forcing your heating system to work overtime to maintain consistent temperatures throughout the house. In addition, overworking your heating and cooling systems causes excessive wear and tear that can significantly reduce the lifespan of your equipment. A properly insulated attic helps your heating and cooling system to work as efficiently as possible, significantly extending the life of your equipment.

Types of Insulation

There are many types of attic insulation available on the market, but they all fall under one of four categories:

Fiberglass batt insulation: Made from fine glass fibers, this is the most common type of insulation. It is available in blankets or loose-fill, and can be blown into finished attics and walls. It is moisture-resistant and has a high R-value.

Cellulose insulation: Made from recycled paper products treated with fire retardants, this is the most environmentally friendly and has a higher R-value than fiberglass. It is also moisture-resistant and can be blown into finished attics.

Spray foam: This is a liquid that expands into a thick foam when applied, and can be either open- or closed-cell. It provides a high R-value, fills gaps and cracks effectively and is quick to install. It can irritate the skin and eyes, so proper protective gear is required during installation.

Spraytech Insulators
“N4310 Ebbe Acres Dr
Waupaca, WI 54981”
715-412-0571