When you have a septic system, the solid waste that goes down your toilets and drains is separated from the liquid wastewater that enters your tank. Solid waste sinks to the bottom of your septic tank, while fats and oils float on top of it. This separating process ideally prevents solid waste from traveling out to your home’s absorption field, where it can clog up the soil. This is why you need to regularly have your septic tank pumped to remove the solid waste. This Link: Busy Bee Septic and Excavating LLC

Frequently Asked Questions About Septic Tank Pumping

How often your septic tank needs to be pumped will depend on the size of your tank and the number of people in your household. A large family will use more toilets and sinks than a smaller one, which places a heavier burden on your septic system. Additionally, if you install a garbage disposal, this can add up to 50 percent more solid waste to your septic tank.

A full septic tank can lead to sewage backups into your toilets, showers and drains. It can also contaminate your yard and cause health problems by allowing odor-causing gases to waft through your home’s vents.

One of the best ways to know when it’s time to have your septic tank pumped is to use a septic system monitor. These are inexpensive devices that can measure sludge levels in your septic tank. To use them, simply stick the velcro end of the probe straight down into your septic tank through the sludge, until you feel it touch the bottom. The dark thick sludge will cling to the velcro strip on the probe, which will tell you how much sludge has accumulated.

embed this

Busy Bee Septic and Excavating LLC
114 Houston St, Maybrook, NY 12543, United States
(845)294-5771

While kitchens and bathrooms get the most attention when it comes to home improvement, attics can also benefit greatly from proper insulation. An insulated attic keeps heat inside in winter and out in summer, saving you money on energy bills while maintaining a more comfortable home.

Desert Spray Foaming can lead to cold rooms, ice dams, and high energy bills. If you’re noticing any of these issues, it’s time to call for a professional insulation contractor in Phoenix.

There are several types of attic insulation available, including blanket or batt insulation, blown-in insulation, spray foam, and rigid foam boards. Each type has advantages and disadvantages. Before selecting a type, consider the following factors:

Blanket Insulation

A popular DIY choice, blanket insulation comes in sheets that can be easily affixed to attic floorboards. This type of insulation is made of fiberglass, cellulose, or mineral wool. It is cheaper than other options but has a lower maximum R-value and may settle over time, leading to gaps that let outside air into your home.

Blown-in Insulation

Also known as loose-fill, this type of insulation is blown into the attic from a portable machine. It can be made of fiberglass, cellulose, mineral or rock wool. It costs more than other types but has a higher R-value and can be used in tight spaces. It can be difficult to install correctly, so it’s best to leave this type of attic insulation to a professional.

Desert Spray Foaming
150 Fm 1429 Seminole, TX 79360
432-209-9154

A well-insulated attic prevents heat loss and reduces energy costs. It helps keep indoor and outdoor air separated, making it easier for your home to stay comfortable year-round. This upgrade is one of the most affordable and highest-return ENERGY STAR home upgrades.

Keystone Premier Spray Foam Insulation levels and air leaks cause your heating and cooling system to work harder, wasting energy. They also make your home feel drafty and uncomfortable during winter and summer.

Understanding R-Value: What You Need to Know for Effective Attic Insulation

You can add attic insulation as a DIY project, or hire a professional to do it for you. Before you start, measure the existing insulation with a tape measure to see how much you have. Choose the type of insulation that best fits your needs, budget and climate.

Fiberglass batt and roll insulation is a common choice. It comes in pre-cut, long rolls that are easy to fit between the framing members (like joists and trusses) in your attic. It resists heat flow, and can be blown in using special equipment. It is usually paired with an attic air seal. It has a R-value of 2.9-4.3 per inch.

If you want to add cellulose or mineral wool insulation, make sure it is unfaced (it has no paper layer) and does not overlap with the fiberglass. It is more expensive than fiberglass, but it does not require a vapor barrier and is moisture resistant. Cellulose is also a favorite snack of raccoons, so it is not recommended if you live in an area where raccoons are a problem.

Keystone Premier Spray Foam Insulation
8 Azalea Dr, Windsor, PA 17366, United States
717-501-3718